제품설명
A15
제품특징
- 75°×50° 커버리지
- 3″ (voice-coil) HF
- 듀얼 앵글 폴 소켓
- 스탠드 위에 마운트 할수 있는 스피커로 최고의 성능을 자랑함
- 동급제품 중 최경량 (Neodymium marnet 사용)
- 고출력을 위한 듀얼 보이스 코일
- 최고급목재 사용
제품스팩
System Type: | 15, two-way, bass-reflex |
Frequency Range (-10 dB): | 40 Hz - 20kHz |
Frequency Response (±3 dB): | 53 Hz - 20 kHz |
Coverage Pattern: | 75º x 50º nominal |
| Power Rating (Continuous/Program/Peak): | 500 W / 1000 W / 2000 W |
Dimensions (H x W x D): | 711 mm x 439 mm x 406 mm
(28 in. x 17.3 in x 16 in) |
Net Weight: | 20 kg (48 lbs.) |
C-MARK MR-2350
제품스팩
4Ω Stereo Power : 525W
8Ω Stereo Power : 350W
Frequency Response : 20Hz - 20KHz
S/N Ratio (A Weighted) : -103dB
Input Sensitivity : 0.775V
Balanced : >20KΩ
Unbalanced : >10KΩ
TDH (Below Rated Power) : <0.05%@1KHz
Dimensions : 89×483×400mm
Weight : 24KG
MACKIE CFX12.mkII
제품스팩 CFX Series Specifications | Frequency Response | | Mic Input to any Output Trim at 0 dB | | 32Hz to 20kHz | +0, -1 dB, | | Distortion | | THD and SMPTE IMD; 20Hz to 20kHz | | Mic Input to Main Output | < 0.05% at +4 dBu output | | Noise | | 20Hz to 20kHz BW (150 Ohms source impedance) | | Equivalent Input Noise (EIN) | -127 dBu | Residual Output Noise
Main, Monitor, & Effects outputs
Channel & Master levels off | -95 dBu | | Common Mode Rejection Ratio (CMRR) | | at 1kHz, Trim at 0 dB | 60 dB | | Crosstalk | | Adjacent Inputs or Input to Output | -90 dB at 1kHz | | Fader Off | -90 dB at 1kHz | | Mute Switch and Break Switch Mute | -80 dB at 1kHz | | Input Level Trim Control Range | +6 to -50dB | | Phantom Power | +48V DC |
| Equalization | | Low Cut | 100Hz, -18dB/octave | | Mono Channel EQ | High | ±15dB at 12kHz | | Mid | ±15 dB at 100Hz to 8kHz | | Low | ±15 dB at 80Hz | | Stereo Channel EQ | High | ±15 dB at 12kHz | | High Mid | ±15 dB at 3kHz | | Low Mid | ±15 dB at 400Hz | | Low | ±15 dB at 80Hz | | Graphic EQ | (9 bands):
±15 dB
Q =1.414 | ISO octave centers at
63Hz, 125Hz, 250Hz, 500Hz, 1k, 2k, 4k, 8k, 16kHz |
| Mixer Rated Output | | Main, Sub, Aux, & Efx: | +4 dBu | | Maximum Rated Output: | +20 dBu | | Since we're always striving to make our stuff better by incorporating new and improved materials, components and manufacturing methods, we reserve the right to change these specifications at any time without notice. |
| Maximum Input Levels | | Mic input | Trim at +6 dB | +18 dBu | | Line Input | Trim at -15 dB | +38 dBu | Insert Return, Stereo Line Input,
Tape Input, and Effects Return | +20 dBu | | Maximum Voltage Gain | | Mic input to | Insert Output | 50 dB | | Tape Output | 66 dB | | Sub Output | 66 dB | | Main Output | 76 dB | | Aux Send | 71 dB | | Line Input to | Insert Output | 30 dB | | Tape Output | 46 dB | | Sub Output | 46 dB | | Main Output | 56 dB | | Aux Send | 51 dB | | Stereo Line Input to | Tape Output | 40 dB | | Sub Output | 40 dB | | Main Output | 50 dB | | Aux Send | 45 dB | | Tape Input to | Main Output | 30 dB | | Effects Return to | Main Output | 30 dB |
| Input Impedance | | Mic Input | 3 kilohms, balanced | | Line Input | 40 kilohms, balanced | | Insert Return, Stereo Line Input, Tape Input, and Effects Returns | 10 kilohms, unbalanced | | Output Impedance | | Main Output, Insert Output, Tape Output, Sub Output, and Effects Sends | 150 Ohms | | Digital Effects | | Resolution | 32-bit EMAC processing, 2-channel | | Number of Presets | 16 | | Parameters | 2 controllable | | Channel Level Set LED (Sensitivity) | 0 dBu (normal operating level) | | VU Meters | | Main L/R 12 segments | Clip, +10, +7, +4, +2, 0, -2, -4, -7, -10, -20,-30 | | Weight: | | CFX12.mkII | 17.8 lbs (8.1kg) | | CFX16.mkII | 21.0 lbs (9.5kg) | | CFX20.mkII | 24.3 lbs. (11.0kg) |
|
* 믹서 채널 변경시 전화 문의 *