RCF ART-312 패키지

제품설명

RCF ART-312

제품스팩

ACOUSTICAL SPECIFICATIONS
Frequency response	50-20Khz
Max SPL	127dB
Sensitivity 1w/1m
Coverage angle	90x70
Compression driver	neo1
Midrange
Woofer	neo1
Power handling
INPUT SECTION
Input signal	bal/unbal
Input connector	jack/xlr
Output signal connector	xlr
Input sensitivity	0 dBu
Mic. input sensitivity	-40 dBu
PROCESSOR SECTION
Crossover frequencies	1800Hz
Selectable high pass output
Protections	DC/short cir.
Limiter	fast limiter
Master volume	yes
Phase switch
Music/Voice eq	yes
Remote control option	yes
AMPLIFIER
Nominal power	350Watt
High frequencies	ab/50Watt
Mid frequencies
Low frequencies	H/300Watt
Cooling	Convection
PHISICAL SPECIFICATIONS
Height	537
Width	337
Depth	315
Weight	12.4Kg
Cabinet	Composite PP
Hardware	2 M10 flying points
Handles	1 top
Pole Mount / Cap	yes
Colour	Anthracite grey

C-MARK MR-2350

제품스팩

4Ω Stereo Power : 525W

8Ω Stereo Power : 350W

Frequency Response : 20Hz - 20KHz

S/N Ratio (A Weighted) : -103dB

Input Sensitivity : 0.775V

Balanced : >20KΩ

Unbalanced : >10KΩ

TDH (Below Rated Power) : <0.05%@1KHz

Dimensions : 89×483×400mm

Weight : 24KG

MACKIE CFX12.mkII

제품스팩

CFX Series Specifications

Frequency Response
Mic Input to any Output Trim at 0 dB
32Hz to 20kHz	+0, -1 dB,
Distortion
THD and SMPTE IMD; 20Hz to 20kHz
Mic Input to Main Output	< 0.05% at +4 dBu output
Noise
20Hz to 20kHz BW (150 Ohms source impedance)
Equivalent Input Noise (EIN)	-127 dBu
Residual Output Noise Main, Monitor, & Effects outputs Channel & Master levels off	-95 dBu
Common Mode Rejection Ratio (CMRR)
at 1kHz, Trim at 0 dB	60 dB
Crosstalk
Adjacent Inputs or Input to Output	-90 dB at 1kHz
Fader Off	-90 dB at 1kHz
Mute Switch and Break Switch Mute	-80 dB at 1kHz
Input Level Trim Control Range
+6 to -50dB
Phantom Power
+48V DC

Equalization
Low Cut		100Hz, -18dB/octave
Mono Channel EQ	High	±15dB at 12kHz
	Mid	±15 dB at 100Hz to 8kHz
	Low	±15 dB at 80Hz
Stereo Channel EQ	High	±15 dB at 12kHz
	High Mid	±15 dB at 3kHz
	Low Mid	±15 dB at 400Hz
	Low	±15 dB at 80Hz
Graphic EQ	(9 bands): ±15 dB Q =1.414	ISO octave centers at 63Hz, 125Hz, 250Hz, 500Hz, 1k, 2k, 4k, 8k, 16kHz

Mixer Rated Output
Main, Sub, Aux, & Efx:	+4 dBu
Maximum Rated Output:	+20 dBu
Since we're always striving to make our stuff better by incorporating new and improved materials, components and manufacturing methods, we reserve the right to change these specifications at any time without notice.

Maximum Input Levels
Mic input	Trim at +6 dB	+18 dBu
Line Input	Trim at -15 dB	+38 dBu
Insert Return, Stereo Line Input, Tape Input, and Effects Return		+20 dBu
Maximum Voltage Gain
Mic input to	Insert Output	50 dB
	Tape Output	66 dB
	Sub Output	66 dB
	Main Output	76 dB
	Aux Send	71 dB
Line Input to	Insert Output	30 dB
	Tape Output	46 dB
	Sub Output	46 dB
	Main Output	56 dB
	Aux Send	51 dB
Stereo Line Input to	Tape Output	40 dB
	Sub Output	40 dB
	Main Output	50 dB
	Aux Send	45 dB
Tape Input to	Main Output	30 dB
Effects Return to	Main Output	30 dB

Input Impedance
Mic Input	3 kilohms, balanced
Line Input	40 kilohms, balanced
Insert Return, Stereo Line Input, Tape Input, and Effects Returns	10 kilohms, unbalanced
Output Impedance
Main Output, Insert Output, Tape Output, Sub Output, and Effects Sends	150 Ohms
Digital Effects
Resolution	32-bit EMAC processing, 2-channel
Number of Presets	16
Parameters	2 controllable
Channel Level Set LED (Sensitivity)
0 dBu (normal operating level)
VU Meters
Main L/R 12 segments	Clip, +10, +7, +4, +2, 0, -2, -4, -7, -10, -20,-30
Weight:
CFX12.mkII	17.8 lbs (8.1kg)
CFX16.mkII	21.0 lbs (9.5kg)
CFX20.mkII	24.3 lbs. (11.0kg)

* 믹서 채널 변경시 전화 문의 *